
6KW - BATTERIES LFP - 10 KWH - IP45
HYBRID INVERTER 6 KW + LFP BATTERY 10 KWH IP45
- 6 kW nominal — 18 kVA peak off-grid (×3)
- 10 kWh LFP battery — > 6,000 cycles @ 100% DoD
- IP45 — outdoor or unheated room

3 kW · 5.12 kWh · entry level
AiO residential storage system — 3 kW / 5 kWh, integrated LF hybrid inverter
The EAD ESS-3000 is the entry-level of the EAD ESS family: low-frequency hybrid inverter, MPPT controller and 5.12 kWh LiFePO4 battery in a single compact block. Designed for indoor use, it suits households starting their self-consumption journey.
Prices shared on simple quote request · Reply within 24–48 hours.
Highlights
Ideal starter for self-consumption
Built-in adaptive BMS, Bluetooth + App monitoring
Indoor use only (IP21)
10-year design life
Versus the competition
In the residential hybrid inverter segment, many market solutions require you to buy the inverter and battery separately, verify their compatibility, then make them coexist on the same wall.
The EAD ESS range and the EAD-ESS-M integrate the inverter and battery in a single enclosure — less wiring, less configuration, fewer points of failure than a self-assembled architecture with separate components.
A design recognised for its industrial robustness and its ability to deliver 3× the nominal power at peak — a real advantage to start demanding loads (motors, pumps) without difficulty in backup mode.
A rarity in this price segment, allowing outdoor installation without additional protective housing.
Datasheet
| Nominal power | 3,000 W |
|---|---|
| Peak power (off-grid) | 9,000 VA (×3) |
| Battery capacity | 5,120 Wh LiFePO4 — 51.2 Vdc |
| Max charge / discharge current | 100 A / 100 A |
| Life cycles | > 6,000 @ 0.2C · 100% DoD |
| Inverter | Low-frequency (LF) hybrid — max efficiency 90% |
| PV input | 3,200 W max · 60 A · 155 Vdc max · MPPT 72–120 Vdc |
| AC input / output | 165–265 Vac single-phase 50/60 Hz / 220–230 Vac pure sine wave |
| Switching time | ≤ 8 ms |
| Monitoring / BMS | Bluetooth + App / built-in adaptive BMS |
| Protection / installation | IP21 (indoor) — wall or floor mounted |
| Dimensions | 580 × 278 × 760 mm |
| Operating temperature | -10 to +50 °C |
| Certifications | CE · IEC 62619 · UN 38.3 |
| Warranty | 5-year manufacturer — 10-year design life |
| Technology | Revolsys / IBT Technologies |
Technical data is provided for guidance only and may change without notice.
Good to know
Stock available in Europe for most references. Lead times and terms confirmed on quote.
CE certification, manufacturer warranty and technical documentation shipped with every product.
Our team handles technical after-sales support and the supply of spare parts.
The price? The price of this product is shared after we receive your quote request. Our team replies with a personalised price, the detailed technical sheet and the delivery terms.
Complementary products

6KW - BATTERIES LFP - 10 KWH - IP45

6KW - BATTERIES LFP - 14.3 KWH - IP66
Price, detailed technical sheet and advice, sent to you shortly.